Zurück zu: HEW-Ox.x-F90

HEW-O1.0-F90

DruckenShare
Elektrodenhalter, Typ E, Ag/AgCl-Draht, ohne Druckanschluß, für Pipetten mit Außendurchmesser 1,0 mm, Anschluß: 2 mm-Buchse, 90° abgewinkelt
Electrode holder HEW-Ox.x-F90
Beschreibung

Science Products offers microelectrode holders for various headstages/amplifiers.

  Part numbers/Ordering information  
 

type

wire/pellet  - with/without port  O.D. glass   - pin/jack straight/angle - handle
HE = pin/jack

W = wire

P = with port

x.x (mm)

M = 2 mm pin  45 = 45° angle         H
HB = BNC

  P = pellet

O = without port   F = 2 mm jack  90 = 90° angle  
HU = HLU   PP = additional port     without sign = straight
HL1 = HL-1   V = Vent        
HL2 = HL-2(*)            
(*) HL2 type holders discontinued - please use HE type holders with 2 mm pin.
 

 

 

 

Examples: HEW - P1.5 - M90   = E type electrode holder,  Ag wire, with port, for 1.5 mm glass, 2 mm pin connector, 90° angle
  HEP - O1.2 - F        = E type electrode holder, Ag-AgCl pellet,  without port, for 1.2 mm glass, 2 mm jack connector, straight
  HBW - P1.0            = BNC type electrode holder, Ag wire, with port, for 1.0 mm glass

 

 

The HE type holders are designed to fit older Dagan, Warner, or WPI amplifiers and have a 2 mm pin or a 2 mm jack to connect the headstage.
These electrode holders are available with a replaceable Ag wire (must be chloridinated before use) or a 2 mm × 2 mm Ag-AgCl pellet. Pipette seals are also replaceable and adjustable.  These holders are available without or with 2 mm suction port, straight, 90° or 45° (second suction port upon request). You can get 45° holders with handle.

The HB type holders fit headstages with BNC connector. They are straight and are equipped without or with 2 mm suction port. You can choose between a replaceable Ag wire (must be chloridinated before use) or a 2 mm × 2 mm Ag-AgCl pellet. Pipette seals are also replaceable and adjustable.

The HU type holders are made for Axon U headstages. The HL1 and HL2* types fit older Axon headstages.

All electrode holders are made of polycarbonate (HB types of Teflon upon request). The holders can fit glass with O.D. (mm): 1.0; 1.2; 1.5, or 2.0 (x.x please specify when ordering).

 

 

Angebot freibleibend.

Preis:

in EURO, zzgl. 19 % Mwst.

Lieferung: frei Haus in Deutschland ab 200,00 € (netto) Warenwert
10,00 € Versandkosten bei Bestellungen unter 200,00 €
Lieferzeit: ab Lager Hofheim, sonst ca. 4-6 Wochen
Zahlung: 14 Tage rein netto